Edward's Example Projects

From Loopy Pro Wiki
Revision as of 06:51, 6 June 2025 by Edwards (talk | contribs)

This page has links to projects that demonstrate useful techniques.

Clip Sequencing Examples

Dial Sequencers 1.1
Screenshot of the dial sequencer example

This project demonstrates using a stepped dial to sequence clips into a song without need for the timeline. The project demonstrates two ways you might use a dial to sequence a song:

  • An automated dial that plays the song from start to finish when triggered
  • A 'stepper' dial that advances from one section to the next when triggered.

In your own projects, you can combine the techniques. For example, you might set up a dial to advance through some parts and manually advance for others.

The projects:

Miscellany

SMC-Mixer Compatibility

The M-Vave SMC-Mixer is a cheap popular MIDI mixer controller. It has DAW and a user/CC modes that aren't entirely friendly to the way that Loopy Pro works. In DAW mode, it's faders don't work with Loopy Pro because they send pitchbend which Loopy Pro doesn't yet support for incoming MIDI bindings, its encoders use a different protocol than Loopy Pro supports and feedback doesn't work because the mixer doesn't respond to 8X style note off messages (even though that is the type of of note off that its buttons send). In CC mode, it does not respond to Loopy Pro's MIDI feedback. The mixer has hard-coded note mappings for the LEDs -- so feedback in CC doesn't work.

By using the MIDIFire application between the SMC-Mixer and Loopy Pro, you can use the SMC-Mixer in DAW mode. The faders and encoders and MIDI feedback get translated as needed.

Use this MIDIFire project between the SMC and Loopy Pro. It also requires the free streambyter plugin.

See also

Example Projects Listing

Retrieved from "https://wiki.loopypro.com/index.php?title=Edward%27s_Example_Projects&oldid=2088"